Uses
Tameer Super Emulsion can be used on walls, ceilings, old and new cement plasters, chipboards and hardboards.
Surface Preparation
New surfaces should be rubbed down with stone or sandpaper to remove nibs on the plaster. Previously painted surfaces should be thoroughly sandpapered. All surfaces should then be cleaned using a bristle brush or broom. Always ensure that the surface being painted is dry and free from flaking paint, oil, grease, etc.
Application Procedure
For thinning, mix equal volumes of Tameer Super Emulsion and water. For porous surfaces, additional quantity of water may be necessary for the first coat in order to satisfy surface porosity. All equipment and brushes, etc. must always be cleaned with soap and water immediately after use.
Drying Time
Tameer super Emulsion dries out in half an hour and can be re-coated in 1 hour.
Coverage
Tameer Super Emulsion covers 12 – 16 m2 per litre per coat.
Packaging
It is available in 3.64 litres and 14.56 litres pack sizes.
Physical Constants:
- Pack Size: 0.91 LTR ,3.64 LTR & 14.56 LTR (Pack)
- Finish: matt
- VOC Content: Less Than 50g/LTR
- Viscosity @ 30C⁰ 125 KU
- Ph Value @ 25C⁰ 8.5
- Theoretical Spreading rate: 14 to 17Sqrmtr/liter/coat (25±5-microns)
- Drying time: 2-3 -Hours Between coats
Physical constants are subject to normal manufacturing tolerances
Reviews
There are no reviews yet.