Extreme Weather Guard

Tameer Extreme Weather Guard is a high quality, premium exterior paint that protects your home from damaging effects of all types of weather. It is powered with Smart Release Technology which gives advanced protection against algae and fungus that is caused by the sun and rain. Backed by a 6Y weather protection warranty.

Product Features/ Benefits

• Smart Release Technology- 2X Protection Against Algae & Fungus
• Keep Cool Technology
• 7 Year Performance Warranty
• Peel Guard
• Alkali Guard
• Stay Clean Technology
• UV Protect Technology

Application Description

Apply 3-4 coats of Tameer extreme weather guard with 2-3 hrs of interval in between coats. Thinning ratio must be followed as per application procedure.

Preparing the Surfaces

New or bare surfaces: New or bare surfaces must be clean, dry and free from efflorescent salts. Sand the surface with suitable sand paper or sandstone to make the plaster surface smooth. Dust off thoroughly. For best result apply a single coat of Tameer Exterior Primer (Refer to PDS for correct application procedure). Let the surface to dry for 2-3 hrs and then do topcoat application.
If more smoothness is required after priming with Tameer Exterior Primer, fill the surface with Tameer Exterior Acrylic Putty (Refer to PDS for correct application procedure). Let the surface to dry for 2-3 hrs. Sand the surface with suitable sandpaper, dust off and apply a single coat of Tameer Exterior Primer (Refer to PDS for correct application procedure) before application of topcoat.

Physical Properties

Colour: Standard Color Range

Finish Matt

Viscosity 120-130 KU/30 0 C

Solids (vol %) 48 ± 2

Flash point >34°C

Specific Gravity 1.25 – 1.35

Film thickness and spreading rate

Film Thickness 20-30 microns/Coat

Theoretical spreading rate 12-14 (m²/L/coat)

Cleaning

Clean all equipment with clean water immediately after use

Storing

Store paint in dry conditions and protect from extreme temperatures.

Finish   Matt

Coverage 13-15 m2/L

Drying Time2-3 Hours

Coats   3

Storage and handling

The product must be stored following national regulations. The product should be kept in a well-ventilated place, protected from heat and direct sunlight. The containers must be kept tightly closed.

1. It is recommended to store the product away from direct sunlight, i.e., under a shadow and in a well-ventilated area.
2. Keep out of reach of children.

Health and safety

Material health and safety data sheet is available upon request. Please observe the precautionary notice displayed on the container. Ensure proper ventilation during application and drying of paint. Avoid inhalation of paint mist/vapours and skin contact. Spillage of paint on skin should immediately be removed with suitable cleanser soap and water. Eyes should be well flushed with water and immediate medical attention should be sought.