Tameer Water Based Primer is a good quality acrylic-based primer with excellent adhesion and sealing properties for a variety of surfaces.
Product Benefits:
- Good quality PVA based primer
• Require sealing against moisture
• Excellent adhesion
• Sealing
• Matt finish
Tameer water based rimer is formulated to resist alkali and moisture present in the new plaster surfaces. It forms a tough and flexible film which prevents passage of moisture from the substrate through the paint film. Before the application of Tameer Primer, it is essential that the surface to be painted should be dry and free from grease oil and dust. It is for interior use only.
USES
Tameer Primer has been designed for use on cement render concrete, lime plaster, asbestos cement sheets and all other surfaces which require sealing against moisture or alkaline substrate.
SURFACE PREPARATION
Before application of Tameer Primer, it is essential that the surface to be painted should be dry and free from grease oil and dust.
APPLICATION PROCEDURE
Tameer water-based Primer can be applied by thinning (1:1) with water by volume for brush application (depend on surface absorbency). For better results apply two coats of Tameer Primer. For previously painted old surfaces, remove all defective or poorly adhering material by rubbing with a suitable abrasive paper or stiff brush. To smoothen the surface, Tameer Wall Putty can be applied after the application of Tameer water-based Primer.
DRYING TIME
Tameer water-based Primer dries within an hour and can be recoated after 2-3 hours.
COVERAGE
It covers 12-14 m2 per litre per coat (depends upon the absorbency of the surface).
PACKAGING
It is available in 3.64 liter and 14.56 litres pack sizes.
Price 3.64 liter gln rs 1000, 14.56 litre drumy 4000
SAFETY PRECAUTIONS
The container should be protected from extreme hot and cold temperature. It should be properly closed and kept in an upright position after use. In case of contact with eyes rinse with water and seek medical advice.
Reviews
There are no reviews yet.