Tameer Wall Putty is an economical PVA based filler along with acrylic binder for surface preparation. It fills pores and hides surface imperfections of plaster, concrete and other surfaces.
Product Benefits:
- Increases the lifespan of the subsequent topcoat.
• Product for interior use.
• Ideal for filling small surface imperfections such as pinholes and sanding marks.
• Ready to use filler.
Recommended Use:
It is suitable for preparation of base of interior masonry surfaces such as brick work, plaster and cement rendering.
PHYSICAL CONSTANTS:
Pack Size: 5 kG, 20 KG
Price: 5 kg Rs 800, 20 kg drumy RS 3000
Finish: Color: Smooth White
Theoretical Spreading rate: 6-7 Sq/Mtr/KG /coat
VOC Content: Less Than 50g/KG
Drying time: 2-3 -Hours Between coats
APPLICATION DETAIL: Physical constants are subject to normal manufacturing tolerances
Application Method: Putty Applicator
Thinner: Water
No. of Coats: 2 to 3 Layers
Cleaning: Clean all equipment with water
TYPICAL SURFACES:
New Surfaces:
Surface must be clean, dry and free from efflorescent salts. Prime with Tameer Under Coat and prepare the base with Tameer Wall Putty.
Previously painted surfaces:
Thoroughly clean surface Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper and dust off. Prime with Master Wall Sealer and prepare the base with tameer wall putty where needed.
Safety:
Keep away from ignition sources because it is flammable. If you are non-professional please don’t use large surface. Ventilation should be ensured because it contains white sprit. Always keep container air tight. Please follow all local and national safety regulations.
PERSONAL PRECAUTIONS
Wear protective clothing as described in Section 8 of this safety data sheet. In case of spills, beware of slippery floors and surfaces.
HANDLING AND STORAGE
USAGE PRECAUTIONS
Read and follow manufacturer’s recommendations. Always remove grease with soap and water or skin cleaning agent, never use organic solvents. Good personal hygiene is necessary. Wash hands and contaminated areas with water and soap before leaving the work site. Do not eat, drink or smoke when using the product.
STORAGE PRECAUTIONS
Keep away from heat, sparks and open flame. Store in tightly closed original container in a dry, cool and well-ventilated place.
STORAGE CLASS Flammable liquid storage.
Reviews
There are no reviews yet.